下記に記す各入出力ﾁｪｯｸｼｰﾄを用いて、I/Oﾁｪｯｸを実施する。添

下記に記す各入出力ﾁｪｯｸｼｰﾄを用いて、I/Oﾁｪｯｸを実施する。
添付しているI/Oﾁｪｯｸｼｰﾄは、1台目(B5-11)のものになる為、
各号機毎に電気図面を確認し、
ﾁｪｯｸｼｰﾄと差異がある場合は修正してからI/Oﾁｪｯｸ実施すること。
出力ﾁｪｯｸ前に下記をおこなうこと。
①全ての動力系統のNFBをOFFにすること。
②ｴｱｰの残圧を抜き、ﾒｲﾝﾊﾞﾙﾌﾞを閉じること。

結果 (英語) 1:

Noted below each input and output ﾁｪｯｸｼｰﾄ using the implement I/O check.For I/O ﾁｪｯｸｼｰﾄ have attached will be the first (B5-11)Items of machine and confirmed electrical drawingsTo conduct I/O check and fix if there is ﾁｪｯｸｼｰﾄ and the difference from it.Do the following before output check.1. to switch OFF the power lines of all NFB.(2) that the ｴｱｰ pressure, close the ﾒｲﾝﾊﾞﾙﾌﾞ.

結果 (英語) 2:

By using each input and output check sheet referred to below, to implement the I / O check.
Attached to that I / O check sheet, in order to become a thing of the first unit (B5-11),
check the electrical drawings for each Unit,
I / O and can correct if there is a check sheet and the difference be checked out.
Doing the following before output check.
① to be the OFF NFB all power system.
② Unplug the air of residual pressure, closing the main valve.

結果 (英語) 3:

By using the input ﾁｪｯｸｼｰﾄ described below, and I O ﾁｪｯｸ. I and O ﾁｪｯｸｼｰﾄ attached to the first B 5 -- 11 to be, for each unit of electricity when there is a difference in the drawings and make sure they ﾁｪｯｸｼｰﾄ I and O ﾁｪｯｸ to fix it. Before performing the following at the output ﾁｪｯｸ. It OFF NFB to all
① power system. To remove the residual pressure of
② ｴｱｰ, close ﾒｲﾝﾊﾞﾙﾌﾞ. At