空調機内配管断熱不足による結露水が下部ドレインパンに入らない配管貫通部

空調機内配管断熱不足による結露水が下部ドレインパンに入らない
配管貫通部シールの上保温内部約100ｍｍの突き出し。
ドレインパンに水が入らない部分の構造 下部壁にシールの上ドレインパンに入るよう加工
報告書に書き加える。 また場所を図面を書き込む。
及

結果 (英語) 1:

Fit bottom drain condensation water due to lack of air conditioning cabin piping insulationOn the pipe penetration seal sticking out of the internal insulation 100 mm.Bottom wall parts drain water does not get into the seal on the drain so machineAdd to report. Also write the location to the drawing.And

結果 (英語) 2:

Condensed water does not fall to the bottom drain pan with air conditioning in-flight piping insulation lack
projecting warmth inside about 100mm over the pipe penetration part seal.
Processing so that the drain pan into the drain pan on top of the seal to structure the bottom wall of the part that water does not enter
Add wrote in the report. You also write to the drawings location.
及

結果 (英語) 3:

Pipe penetrates through the sealing portion of the condensation water does not enter the lower drain pan on the internal temperature of about 100 mm protruding in the air conditioner pipe insulation. In a portion of the drain pan does not enter the water at the lower wall structure to the processing at the report into the seal on the drain pan. In addition to the drawings. And at