MPC栁澤部長いつもお世話になっております。差圧測定データー（3月9日

MPC
栁澤部長

いつもお世話になっております。
差圧測定データー（3月9日と本日10月5日）を添付致しました。
お手数うでも、ご確認お願いします。

結果 (英語) 1:

MPCTakayanagi sawabe lengthsAlways take care....Differential pressure measurement data (3/9 and today 10/5) attached.Please please please, even.Please let me respond to <<<.You will be staying.Please provide information and verification. It is a query and that renovations of this change in pressure in the clean room.Question(1) clean room (combined with area) relative pressure against targets which level? <<< Air plus 8-was designed at 10 PA, nashimoto-like from a little pressure (12-13 PA) We want up and a fan to draw in fresh air fans Installed. (2) more by Edwin's inquiry.The parts cleaning area Chrysler m of this increase two weekly Air emissions Contact area, combined with pressure drops than the reference value. (Email) There are ways to increase the pressure? Is the order of the air inlet or need? In the management area, <<< balloons at six locations in the washing room 2 places, so increased the mouth The pressure inside the clean room air plus 9.5 PA by lowering (previously measured 18 PA) We are. To increase the pressure machine room d at the boost fan We are considering that. Nashimoto's case this management area, two parts washing area in the six locations to clean air added will.Assembling ⇒ exhaust dampers to the packing area is open so pressure is growing in the eyes is understood against the reference valueWhat consists of care.Damper <<< packaging range is a clean room with air pressure air pressure difference (currently 9.5 PA) most differential pressure Place so damper is opened that is fine.More than. Thank you.Dharma construction Honda

結果 (英語) 2:

MPC
栁澤director

always has been taken care of.
Differential pressure measurement data (March 9 days and today, October 5, 2008) we attach.
Sorry to trouble Udemo, please confirm.
<<< Please let me respond to.




Thank you for your help.
We wish to confirm the provision of information.

In this renovation is a query of the internal pressure in the clean room has changed.
Questions
① What what level value against the planned value standard internal pressure of the clean room (assembly area)?
<<< But had been designed in the outside air plus 8 ~ 10PA, a little more pressure (12 ~ 13PA) from Nashimoto like
there is a request of the want to raise, the blower fan to the fresh air of the service entrance
was fitted with a .

② is a query from the representative Edwin.
Although we installed two places emissions of Cree Air in this parts cleaning area clean room of
there was contact with the internal pressure of the assembly area has fallen below the reference value. (Email below)
Is there a way to increase the internal pressure? Need Toka inlet air of the outside air of fresh air?
2 places in <<< management area, so we increased the outlet in six locations in the cleaning chamber,
the pressure in the clean room is reduced to ambient air plus 9.5PA (previous measurements 18PA)
has.
It established a boost fan in the machine room of the fresh air duct in order to increase the internal pressure
you are considering a plan to.

It has been added to the six clean air outlet at in this Nashimoto Mr. case management area two places parts cleaning area.
Because the exhaust damper to the assembly ⇒ packing area are open internal pressure will find in the eye of is growing, but with respect to the reference value
is anxious what about what.
Damper of <<< packing zone, the internal pressure difference between the outside air pressure and the clean room (currently 9.5PA) is the most differential pressure
because it is the place where there is, it is normal that the damper is open.

It will be more than. Thank you.

Dharma Construction Honda