TDPI遠藤社長 戸羽工場長 滑川部長 木村部長いつもお世話になってお

TDPI
遠藤社長 戸羽工場長 滑川部長 木村部長

いつもお世話になっております。
本日は、お忙しい中での打ち合わせありがとう御座いました。
議事録は下記の通りです。
お手数でも、ご確認お願いします。

日時：2016年12月22日（木）午前10時～11時45
場所：DTPI会議室
出席者：DTPI: 戸羽工場長、木村部長、フリップ
ダルマ： 本田 ロナルド
PTGI : DONATO

１、照明ランプに貼り付けるUVカットフィルムは東海様より日本から取り寄せて頂く

2、純水エリアに関しましての工程
11月末にIEテック様にて水出しテスト運転予定

結果 (英語) 1:

TDPIDepartment head Director Kimura Endo Toba namegawa plantAlways take care....In today's busy meeting thank you.Each transcript is as follows.Please also check please. Re: 12/22/2016 (Thursday) 10:00 ~ 11:00 45Venue: Conference room, DTPIAttendees: DTPI: Toba plant manager, General Manager of Kimura, flip Dharma: Honda Ronald PTGI: DONATO 1 UV cut film into lamps from Tokai from Japan conducted Process about 2, pure water area IE tech specifications water out testing to end 11 months of operation is planned for Modified 11-end of <<< water out testing will continue tests after you have Dharma construction 11/19 in water supply, wastewater, air and power construction to complete. IE tech specifications test adjustment starting from 11/23Design a clean booth in a clean room, 3. <<< To 10/5 design and quote offer. 10/21 would like a purchase order. Fan coil units, stainless steel, electrostatic plastic sheets, etc. Materials ordered. Floor epoxy coating will be available, will be set up after painting. Create quote related 4, nitrogen tank yard layout, tank installation. Tank arrangement that PEZA already <<< Submit a quote to 11/21 PTGI like to review of the tank location. 12/1 the purchase receipt. Japan prepares for permit application. Weekend-meetings planned early next week about PTGI and the building permit application. More 12/2 trash yard relocation, canteen building demolition completion. Basic construction start of the tank Floor 5, factory floor (injection room, printing room) Through the antistatic epoxy coating Purchase order receipt to 11/14. Paint color is beige. <<< Up to 12/18 in the painted finish6, air conditioning filter replacement timing check on the installation of the differential pressure gauge. Filter loss pressure PA 167 (new time), so is the differential pressure gauge with a full range of 500 PA Things can become necessary. Please consider at <<< TDPIChecking the wastewater from toilet 7, Horn took office, wash room. Connected to the drainage system from the <<< washing machine (3000 LTR).8 the existing clean room floor paint for new clean room in the temporary relocation to Our <<< relocating machine layout. Energy related to electrostatic prevention epoxy coating in clean room and machinery relocation 12/10 Submit a quote for the construction. 12/15, a purchase order. Then moved to mechanical removal, a new clean room 12/23 (Friday) evening 12/26 (Monday) Up to complete the construction can be running. Electrostatic prevention epoxy coating, existing clean room with clean booth completed after January 28, 29, To mechanical restoration. Adjust the glass 9, mechanical loading door (emergency door) After mechanical loading of all <<< and back shape of the emergency door, gasket and paste Adjust the hinges, Stoppers. Back to basically the airtight door.To attach the door (two doors, lockable) 10, storage area can come from an external source. <<< Coming soon to 12/2611, Saber room doors, ventilation fan to replace. <<< 12/18 remove the exhaust fan with a finish.12, existing and new clean room attach each niゖ Office humidification equipment power supply (220 V electrical outlet). Complete wiring 12/18 (Sunday) lamp13,12 月 18 日 (Sunday), remove the temporary enclosure for the plant site. <<< 18, removal was completedReview 14, room entrance door gaskets and rivets to adjust. <<< Coming soon to 12/26.Install the switch from 15, cleaner exhaust fans (3 units). And shove until the external exhaust duct.Repairing and painting around the front door, 16. Over the areas to be retouched a chance please thank you. Next meeting will be scheduled more 12/29 (Thursday) 10:00.

結果 (英語) 2:

TDPI
Endo president Toba plant Namekawa director Kimura, general manager

always has been taken care of.
Thank you very much for meeting in a busy.
Proceedings are as follows.
Also sorry to trouble you, but, please confirm.

Date: 2016 December 22 (Thursday) 10:00 am to 11 pm 45
Location: DTPI conference room
attendees: DTPI: Toba plant, Kimura Director, flip
Dharma: Honda Ronald
PTGI: DONATO

1, paste it into the illuminating lamp UV cut film is I am ordered from Japan than Tokai like

2, the steps of the regard to pure water area
water out test operation plan at IE Tech-like at the end of November
<<< water out tests, because the need to keep out after the test there 11 at the end of the month change
Dharma construction water supply to up to November 19, the waste water, air, to complete the power construction.
November 23, than IE Tech test adjustment starts at like

3, to design a clean booth in the clean room.
<<< Blueprint on October 5, quote Hisage. October 21, a purchase order is received.
Fan coil unit, stainless steel, anti-static plastic, such as a sheet
is member already ordered.
It will be established after the painting there is a plan of the floor epoxy paint.

4, nitrogen tank area of the layout, to create a quote related tank installation.
Confirmed tank placed in the PEZA
<<
<A quote submitted on November 21, for a review of the tank location at PTGI like.
December 1, purchase order acceptance. Proceed with the preparation of the permit application.
Meeting scheduled on PTGI like a building permit application at the beginning of the weekend - next week now.
Relocation of garbage storage than December 2, dismantling the completion of the Canteen building.
Foundation work the start of the tank

5, factory floor (injection room, printing room) floor finish of
proceeding with epoxy paint anti-static
purchase order received on November 14. Paint color is beige
<<< December 18, up to a painting completed

6, to consider the establishment of a differential pressure gauge to exchange time confirmation of the air conditioner filter.
Since Son圧of filter is 167PA (when new), differential pressure gauge is of 500PA in the full range
you will need things.
<<< Your consideration receive in TDPI like

7, corner-up chamber, you get to check the drainage from the hand washing of cleaning the room.
<<< Connected to the drainage system from the washing machine (3,000LTR).

8, temporarily transferred to the new clean room for floor painting of the existing clean room
<<< Get the layout of the relocation machine.
Anti-static epoxy paint in a clean room on December 10, the energy involved in the machinery relocation
submit a quote of the construction work. December 15, get a purchase order.
Mechanical removal from the evening of December 23 (Friday), relocated to the new clean room, 12 May 26 (Monday)
to complete the construction work to be able to operate in up to.
Anti-static epoxy paint, the existing clean room in the January 28, 29 days after the clean booth complete
mechanical restoration to.

9, to adjust the Tatetsuke of mechanical loading door (emergency door)
to recover to the shape of the very door Once <<< all the mechanical loading finished, paste of the gasket,
adjust the hinge, stopper. Basically restored to Eataitodoa.

10, is mounting a door that can come and go from the outside in the warehouse area (two-door, with a lock).
<<< Scheduled to be completed until December 26,

11, to mounting door, a ventilation fan to Sabarumu.
Complete mounting a ventilation fan in <<< December 18.

12, existing, of humidifier to new clean room power supply (outlet 220V) attach each two places.
Wiring work December 18 (Sunday) mounting completion

13, December 18 (Sunday), to remove the temporary enclosure for the hall factory.
<<< 18 days removal completion

14, to adjust the gasket review and rivets of each room entrance door.
<<< Expected to be completed until December 26.

15, attach the exhaust switch of fan (three) from the washing machine.
In addition, shove the exhaust duct to the outside.

16, to repair the exterior wall paint around the front door.

It is over, but you pointed out regards when there is a correction point.
The next meeting is December 29 (Thursday) you will be scheduled from 10 am.